粘接低表面能材料的新型胶粘剂研究

详述了用于低表面能材料粘接的新型胶粘剂的制备过程,探讨了低表面能胶粘剂的粘接机理,并讨论了弹性体、三乙基硼烷胺络合物、丙烯酸单体等对低表面能材料胶粘强度的影响.     

脲醛树脂微胶囊包覆红磷阻燃剂制备工艺的研究 Ⅰ.预聚物合成工艺研究

研究了脲醛树脂的预聚物通过原位聚合对红磷进行包覆的一些影响因素。实验表明影响预聚物质量的主要因素是第一阶段尿醛比(F/U)1,第二阶段尿醛比(F/U)2,反应温度和pH值。制备预聚物的最佳条件为:第一阶段尿醛比为2.3∶1(摩尔比),第二阶段尿醛比为1.3∶1(摩尔比),pH值为5.1,反应温度为75℃。制备的预聚物来包覆红磷,颜色为白色;用微胶囊红磷阻燃聚乙烯,当含量为9%时,在500℃下残余物为4.85%。     

添加剂对PSF/ER合金膜结构和性能的影响

介绍了大分子添加荆聚乙烯吡咯烷酮(PVP)和小分子添加荆H2O时聚砜(PSF)／环氧树脂(ER)合金膜结构和渗透、分离及成膜性能的影响。结果表明，添加荆使PSF／ER合金膜的水通量上升，截留率下降；PVP改善了PSF／ER合金膜的成膜性能，当水质量分数大于0．8％时，PSF／ER合金膜的成膜性能下降。     

打火机专用SAN树脂工业化开发生产

介绍了15kt/a本体苯乙烯－丙烯腈（SAN)装置试生产打火机专用SAN树脂的生产情况，确定了主要工艺配方及参数：进料组成为乙苯浓度为6％－11％、丙烯腈浓度为30％－42％，聚合温度130－145℃、压力0．40－0．46MPa，搅拌转速60－90r/min，脱挥温度215－250℃、压力小于等于4kPa；并对影响打火机志用SAN树脂性能的主要工艺条件及因素进行了讨论。结果表明，聚合温度、结合丙烯腈含量、熔体流动指数、转化率是影响打火机专用SAN树脂生产工艺及产品性能的主要因素。     

TPR处理剂的研究

利用活性单体苯乙烯与氯丁橡胶、高苯乙烯热塑弹性体接枝聚合，所得产物稀释后用于ＴＰＲ（ＴｈｅｒｍａｌＰｌａｓｔｉｃＲｕｂｂｅｒ）粘接前的预处理，可明显提高剥离强度。     

高固体分丙烯酸树脂的合成

研究了高固体分丙烯酸树脂合成过程中，引发剂、相对分子质量调节剂、反应温度，溶剂量等工艺条件对树脂相对分子质量及其分布的影响，合成了相对分子质量分布窄，粘度适中的高固体分、高羟基丙烯酸树脂，用异氰酸酯固化剂固化后，其性能与国外同类产品相仿。     

硼酚醛树脂在涂料中的应用

通过将硼酚醛树脂和环氧树脂进行混用,利用硼酚醛树脂优异的耐酸、碱腐蚀性能以及耐高温性能和环氧树脂可以常温固化成膜的特点,制备常温固化的耐高温防腐蚀涂料。     

海特隆酸不饱和聚酯树脂的性能及应用

叙述了海特隆酸不饱和聚酯树脂的特点和性能，并介绍其在湿氯气和其它氧化性介质中的应用。     

Adhesion and Hydrolytic Stability of the Interface Between High-Modulus Polyethylene Fibers and Acrylic Resins

The effects of oxyen plasma treatment on the surface chemistry of Spectra 1000® high modulus polyethylene fibers and on the mechanical properties of fiber-reinforced composites of the fibers in a Bis-GMA based acrylic resin have been studied. X-ray photoelectron spectroscopy and diffuse reflectance FTIR spectroscopy have been used to show that the majority of oxygen on the fiber surface exists mostly in the form of ether and/or epoxy linkages, with carbonyl-, carboxylic- and ester-containing compounds accounting for less than 10 percent of the total. While the untreated and plasma-treated fibers have similar chemical compositions, the surfaces of the plasma-treated fibers are more polar and the oxygen is chemically bonded instead of being merely physisorbed. The interfacial shear strength between the fibers and the acrylic resin is increased by a factor of 2.3 by the plasma treatment indicating the presence of a weak boundary layer on the surface of the untreated fibers. The hydrolytic stability of the composite interfaces was investigated for fibers sized with several Bis-GMA-based adhesives. Maximum stability was attained by sizing with Bis-GMA containing a peroxide catalyst or an amine accelerator. The flexural properties of composites utilizing plasma-treated and untreated fibers were compared in three-point bending. The ultimate bending loads for composites using treated fibers were much higher than those for composites with untreated fibers, but only a fraction of that for glass or Kevlar®-reinforced materials.     

强酸性阳离子交换树脂催化合成氯乙酸异辛酯的研究

对采用７３２强酸性苯乙烯系阳离子交换树脂作催化剂合成氯乙酸异辛酯进行了实验研究，提出了适宜的反应条件。实验结果表明，该法酯化率高、过程简便、产物颜色浅，优于浓硫酸作催化剂。